PDA

View Full Version : Amsoil in your Alpina?


Stirling
01-31-2012, 06:49 PM
Is anyone running Amsoil in their car? I ran it in my E34 m5 and felt it made a difference... Should I try it in the B10 BT?

AlpinaMan
02-01-2012, 09:20 AM
Well, the best oil for your motor (M30 3.5L) regardless of the brand is 20/50 syntactic with Zink additive, which only supplied by Royal Purple or any other brand that have this additive in it.

Also you could get 20/50 syntactic oil and purchase a separate Zink additive and add it to the oil.

Scooter
02-01-2012, 05:32 PM
I believe it should vary with which Alpina you have. I believe Castrol TWS 10w60 is recommended for my car, so that's what I run.

AlpinaMan
02-01-2012, 06:59 PM
The Oil discussion is a long discussion, but to make it short and understandable, you must realize the M30 base inline 6 which the last ones were installed on 1993 535s, 735s have more tolerances in internal components then a M50s, M52s, M60s, M62s and newer engines, so for that reason the oil grades like 0/30 up to 10/60 syntactic are created to serve the range of the motors that made with new technology and precise manufacturing parts and almost 0 tolerances. But in case of older engine you must use thick and additional wear protection agent such as Zink in which helps the oil to cover and fill the larger internal tolerance that the motor would work smoothly and with out burning oil, leaking oil and premature worn out parts.

I personally use 20/50 syntactic with Zink additive in my B10, B11
15/50 syntactic on my Dinan e39 M52
10/60 syntactic with Zink additive on my B7 Turbo
5/40 syntactic in my Audi A3 2.0 T
and if I finish my S54 engine swap I have to use 10/60 syntactic.